IBM FlashSystem Model and Capacity

Which IBM FlashSystem Do You Have, and How Much Can It Hold?

Identify your FlashSystem model and check what the capacity figure means. Catch the difference between raw and usable storage before you approve a quote.

Check Your FlashSystem Before You Buy More Storage

Use the machine type and model number, or MTM, from the system label or quote. Your answers show which model and capacity checks to make next.

How the result is produced: An exact model number carries more weight than a general workload description. Unclear capacity figures or a storage move can make sizing and migration the first jobs to tackle.
Limit: This tool identifies what to check. Final capacity and performance depend on the drive layout and your workload. Ask the supplier to include space for protection, snapshots and growth.

FlashSystem 5200 and 7200 Use Different Drive Codes

Midland lists AGS5 for a 4.8 TB FCM2 in the FlashSystem 5200 context and ADS5 for that capacity in the FlashSystem 7200 context. Keep the model and feature together. A similar drive description does not make every feature code interchangeable.

FlashCore Module codes by model, checked November 15, 2026

FlashSystem model4.8 TB FCM2 featureWhat the supplier needs
ArrayAGS5Full MTM, installed feature, drive count and software level
ArrayADS5Full MTM, installed feature, drive count and software level

For a parts order, confirm the exact part or FRU against the installed configuration. Midland also lists other capacities and feature codes in the same family table; preserve their individual model context.

How Much FlashSystem Capacity Can You Actually Use?

Multiply the drive count by the capacity per drive to get raw TB. These examples use decimal TB. They show the arithmetic, not an orderable configuration or the usable space after protection.

Two worked raw-capacity calculations

ExampleCalculationRaw totalStill unknown
Array8 × 4.8 TB38.4 TBProtection, spare capacity, metadata, snapshots and growth reserve
Array12 × 19.2 TB230.4 TBProtection, spare capacity, metadata, snapshots and growth reserve

Make the Supplier Show the Space Left for Your Data

Raw capacity is the sum of nominal drive capacities. The supplier must show the protected usable result for the actual drive layout, RAID policy, spare allocation and system overhead. Then reserve space for snapshots and growth. Keep replication capacity at the second site as a separate requirement.

Do not multiply raw TB by a marketing compression ratio and call the result usable. Effective capacity depends on the data and the vendor definition. Ask which figure is guaranteed, how it is measured and what happens when the workload compresses poorly.

Check your FlashSystem sizing requirements, then request a storage quote. Give the supplier the model and usable capacity you need. Make the proposal show how it gets there.